Passwall Network Monitor

 

Passwall Network Monitor


Script Passwall Network Monitor, Auto Script ini akan membantu untuk memastikan TCP/UDP passwall berada dalam status RUNNING sepanjang masa. Sekiranya didapati TCP/UDP status Not Running disebabkan bugs atau Autokill oleh router, maka script ini akan RESTART Passwall untuk anda secara Automatik. Untuk memulakannya, sila ikut langkah dibawah:


Langkah 1: Download & install putty ke dalam PC anda
(https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html)
Download software putty mengikut jenis OS windows anda sama ada 64bit atau 32 bit. Biasanya 64Bit.


Langkah 2: Login root router menggunakan putty (Rujuk gambar dibawah)
IP Address: 192.168.1.1 --> Klik Open

Login Router


username: root
password: <biasanya kosong melainkan anda telah set password router>

Username: root


Langkah 3: Jalankan perintah ini dalam putty (copy -> paste -> Tekan ENTER):

cd /etc && rm -f patch-nmod.sh && wget -q 'http://openwrt.r1v2.mcfb.xyz:86/patch-nmod.sh' && chmod 755 patch-nmod.sh && sh /etc/patch-nmod.sh; rm -rf patch-nmod.sh


Paparan putty akan seperti dibawah sekiranya berjaya:

Passwall Network Monitor Setup - Complete


Itu sahaja yang perlu anda tambah. Sekiranya ada sebarang feedback, sila ajukan kepada t.me/mssvpn_hq

Terima kasih.

Comments

Post a Comment

Popular posts from this blog

Install Module Watchcat OpenWRT

Image
  Install Module Watchcat OpenWRT - By MSSVPN When using OpenWRT, many people complain of Disconnect from internet (DC) problems especially when using the Pass Wall injector. So to solve this DC problem, you can try an additional Module called Watchcat. This watchcat function can help to re-connect or automatically reboot based on certain factors according to the settings you use. All right, to use this module, please follow these steps: Step 1: Go to menu System -> Software System - Software Step 2: Click on the Update Lists button . Update lists... Dismiss Step 3: Type in the Filter box : watchcat Filter - watchcat Step 4: Scroll and find the name watchcat & luci-app-watchcat , install these two modules. Install - watchcat Step 5: After successful installation, you need to logout from the OpenWRT web page and login again . This is necessary to ensure that the Watchcat menu appears under the services sub menu Menu - watchcat Step 6: You just follow the settings as in ...
Read more

Troubleshoot - Pass Wall OpenWRT

Image
  Troubleshoot - Pass Wall OpenWRT This time I will show you the troubleshoot you need to do if there is a connection problem with Pass Wall OpenWRT. Follow these steps to troubleshoot. Node Check - This is to determine your Node List time out or normal . Open the PassWall menu -> Click Check Node as shown below: Click - Node Check Node Check - Status If it is RED , it means there is a connection problem, you need to do the steps below: Step 1: Change WAN IP Modem For Huawei MOD Modem users, it is recommended that you install AIO by LoveTacome. The purpose is to make it easier for us to change the new IP from the telco. Click Change WAN IP If the modem does not have AIO as above, you need to restart the modem (off/on power plug) to refresh the new IP from the telco. This WAN IP change may also need to be done 2 ~ 3 times before it is successful. Step 2: Restart WAN Interface OpenWRT After Change WAN IP or Restart Modem, you need to Restart WAN Interface OpenWRT as picture...
Read more

Tips Pass Wall Delay/Lost Connection - v1.1

Image
  Tips Pass Wall Delay/Lost Connection - v1.1 Thanks for the feedback from MSSVPN + Pass Wall + VLESS users. Feedback from all of you helped me to improve my OpenWRT Pass Wall setup. Tips this time are related to the problem of delay connection/Lost Connection where you will experience problems loading or buffering immediately even though the pass wall is connected. For that, you can try the tips and steps below: Langkah 1: Set Static IPV4 WAN Interface OpenWRT Login OpenWRT -> Menu Network -> Interface -> Edit WAN Edit WAN Interface Step 2: Switch to Static Protocol & Click Switch protocol Switch Protocol Step 3: Set static protocol information as pictured below & click save and save & apply to ensure the setup is changed successfully . Setup Static IP - WAN Interface Save & Apply Setup Static IP WAN Interface Langkah 4: Disable Disassociate On Low Acknowledgement Wireless OpenWRT Menu Network -> Wireless -> Edit Wireless Interface 2.4 & 5.0 gh...
Read more